Once your permit is issued, you can schedule inspections through our online portal. To begin, you will need to log in using the email address of the property owner, the listed contractor, or the permit applicant. Once logged in with an email address related to the permit, go to VIEW MY REQUESTS and choose the permit from the list. Once you open the permit, click REQUEST AN INSPECTION at the left. Building Inspections must be scheduled one day in advance and can be scheduled up until midnight the night before.
Inspections must be ready at the time the inspection is requested. Please see our Residential Inspection Checklist for a partial list of what is expected at various stages of construction. Failure to be ready for the requested inspection may result in a $150.00 reinspection fee. Inspections are performed between the hours of 7:30am and 3:00pm Monday through Friday. If you have questions regarding the estimated time of arrival on the jobsite, or questions regarding code requirements for your project, you may speak to your inspector by calling Building Safety between the hours of 7:00am to 7:30am or 3:00pm to 3:30pm.
You must receive an approved inspection at least every 180 days. In the event a project is justifiably delayed, you may apply for a six-month extension, which must be submitted through the Citizenserve portal and approved by Building Safety. A second six-month extension, upon expiration of the first, may also be available by the same process.
Inspection Process
Video Inspection Process
Inspection Code List
| Building |
| 1000 – Footings & Steel |
1041 – M/F Home Setup |
1060 – Drywall Nail |
| 1002 – Interior Footings |
1042 – ADA Rough |
1065 – T-Bar Ceiling |
| 1005 – Building Setbacks |
1043 – Moisture Proofing |
1070 – Exterior Lath |
| 1007 – Slab Grade |
1044 – Soil Drains |
1087 – Tempered Glazing |
| 1009 – Grading |
1045 – Frame |
1088 – Egress Windows |
| 1012 – Grout Stem |
1046 – Int. Braced Wall Panels |
1095 – Combo Rough In |
| 1013 – Grout Lift |
1047 – Ext. BWP/Hold downs |
3645 – Site Investigation |
| 1016 – Pre-Slurry |
1048 – Ext. Building Wrap |
4001 – Building Final |
| 1019 – Base Wall Insulation |
1049 – Insulation |
4006 – Special Insp. Final |
| 1027 – Under Floor Framing |
1053 – Slab Insulation |
4010 – Grading Final |
| 1028 – Finish Fl. Elev. Certificate |
1056 – Soil Conditions |
4011 – ADA Final |
| 1030 – Roof Sheathing Nail |
1057 – Exterior Piers/Footings |
4012 – Site Drainage Final |
| |
|
4015 – Sign Final |
| Mechanical |
| 1500 – Rough Duct |
1512 – In Floor Heating |
1525 – Woodstove/Fireplace |
| 1510 – Underslab Duct |
1513 – Combustion Air |
4002 – Mechanical Final |
| 1511 – Flue Piping |
1515 – Inst of Mechanical Equip |
4009 – Woodstove/Fireplace Final |
| Plumbing |
| 1200 – Underslab DWV |
1230 – Water Yard Line Backfill |
1250 – Water Heater |
| 1201 – Underslab Water |
1231 – Water Piping and Test |
1254 – Expansion Tank |
| 1215 – Water Meter Release |
1232 – Soil & Waste Piping Test |
1255 – Gas Meter Release |
| 1220 – Building Gas Test |
1234 – Gas Yard Line/Test |
1260 – Buried Propane Tank |
| 1225 – Back Flow Device |
1237 – Sewer Ejector Pump |
1265 – H/W Circulating System |
| |
1240 – Sewer Yard Line |
4003 – Plumbing Final |
| Electrical |
| 1305 – Grounding Electrode |
1345 – Bonding |
1391 – SOLAR Bonding |
| 1310 – Under Slab Conduit |
1386 – Upgrade Electric |
1540 – Smoke Alarms |
| 1316 – Temporary Electric |
1387 – Moblie Home Electric |
4004 – Electric Final |
| 1320 – Under Ground Conduit |
1388 – Secondary Electric |
4005 – Solar Final |
| 1327 – Wiring |
1390 – SOLAR Wiring |
4013 – Smoke Alarm Test Final |
| Pool |
| 1600 – Pool Gunite |
1623 – Pool Water Line |
1627 – Pool Barrier |
| 1620 – Pool Plaster |
1624 – Pool Gas Line |
4008 – Pool Final |
| 1621 – Pool Plumbing |
1625 – Pool Bonding |
4014 – Pool Equip. Final |
| 1622 – Pool Elec. Conduit |
1626 – Pool Electric |
|